Diamond_Plate.jpg

                          CW 300                                                  3D PRINTER
         PROUDLY MADE IN USA

SPECIFICATIONS

DETAILS

  • Automatic Z axis alignment.

  • Automatic bed leveling inductive sensor.

  • All plastic components printed in ABS.

  • Filament run out detection sensor.

  • Heated bed.

  • Powder coated aluminum 6061 T6 heated build plate.

  • Print volume -

  •      X 240mm (9.4")

  •      Y 240mm

  •      Z 300mm (11.8").

  • Positional accuracy of .0002" (.005mm).

  • Max nozzle printing temperature recomended = 250C.

  • Max heated bed temperature = 135C.

  • For use with 1.75mm filament.

  • V6 style hot end with 0.4mm nozzle.

  • Programmable part cooling fan.

  • Max layer height = 0.36mm

  • Min layer height = 0.04mm

  • Max printing speed 150mm/sec. Avg print speed 60~100mm/sec.

  • Dual X Y Z motors.

  • 2208 motor drivers on X Y Z in stealthchop silent mode.

  • 8 bit motherboard.

  • AC 110 to DC 24 volt power supply. 

  • LCD display with SD card slot.

  • Can connect to external control device using USB. Or print directly from LCD screen using G-code file loaded on SD card.

CW300 FRONT 1
CW300 FRONT 1

press to zoom
CW FRONT MAX Z
CW FRONT MAX Z

press to zoom
CW HOT END CLOSE
CW HOT END CLOSE

press to zoom
CW300 FRONT 1
CW300 FRONT 1

press to zoom
1/9

One year warranty. Free technical support.

The CW300 3D printer has Built in features to make printing more reliable and easier to operate than many other 3D printers.

 

Comes standard with a bowden extruder for fast lightweight precise X Y movements. Optionally can be converted to a direct drive extruder for printing flexible materials. Necessary components for a simple conversion to direct drive are included.

Automatic Z axis leveling will probe the build plate and level the two Z motor screws. When power is off the Z axis can become skewed, this is corrected for automatically when a print is started.

Automatic bed leveling will probe the build plate to detect and compensate for any tiny variances in the flatness of the build plate.

Boxed frame design makes it simple to close the machines openings off and make use of a heated build chamber for printing more exotic materials.

Twin motors driving every axis uses a simple and reliable design and provides maximum torque to the gantry for lightning fast directional changes while printing.

XYZ 2208 motor drivers are quiet to reduce noise from printer.

 Durable powder coated aluminum build plate spreads heat more evenly than other build plate materials.

Corrosion resistant 316L stainless steel  linear rods used on all axes. Will not rust and will last a life time.

 Bronze bearings provide smooth, quiet motion and longevity.

 Open source electronics components means cost effective and easy to update electronics for specific needs.

CW300 printing a 40mm calibration cube at max print speed of 150mm/sec with 0.240 layer height.

CW300 MAX SPEED 40MM CUBE.jpg

40mm calibration cube printed at max print speed.

BUST1.jpg

250mm tall statue. Max print height is 300mm.